DIY PRODUCT PAGE

Epoxy and Urethane Floors, Coatings, Toppings/Mortars, Joint Repair, Floor Repair Kits 

PRODUCT LIST

EPOXY FLOOR PATCH KIT

WATER BASED EPOXY AND URETHANE (CLEAR AND COLORS)
010 water based clear translucent epoxy @ 54% solids.
013 water based clear epoxy sealer/primer @ 43% solids.
014 satin finish water based colored epoxy sealer @ 61% solids.
015v water based vertical application colored epoxy @ 60% solids.
015 water based amber clear epoxy @ 47.5% solids.
015 water based colored epoxy @ 56% solids.
016 water based colored epoxy skidproofer.
030 water clear water based urethane @ 30% solids.
031 water clear water based acrylic urethane @ 25% solids.
7175 water based epoxy textured non-slip coating @ 74% solids.

WATER BASED REPELLENT TYPE PRODUCTS
017 sodium methyl siliconate concrete waterproofer and sealer.
018 water repellent and sealer/waterproofer - potassium methyl siliconate.
021 silane/siloxane penetrating sealer in either 20% or 40% concentrations.

WATER BASED CEMENT MODIFIER ADDITIVE
809 acrylic cement liquid modifier.
810 acrylic modified portland cement patch kit.

WATER BASED CONCRETE CURE AND SEAL
025 water based concrete sealer - meets ASTM C-309.

MEDIUM/HIGH BUILD EPOXY (COLORS)
100 colored epoxy @ 100% solids.
100hv high wear epoxy @ 97% solids.
100lvp low odor epoxy primer @ 93% solids.
100wf accelerated cure winter formulation.
100t colored epoxy with good color stability @ 100% solids.
100twf accelerated cure winter formulation.
100v vertical application epoxy with good color stability @ 100% solids.
131 tar epoxy coating.(asphalt applications)
131m tar epoxy coating @ 100% solids.(asphalt applications)
180 (medium build) epoxy @ 100% solids - fast dry time.
181 (high build) epoxy @ 100% solids - fast dry time.
210 industrial skidproofer in both coarse and fine textures @ 86% solids.
505v vertical epoxy block filler.
707 colored epoxy @ 100% solids.
707wf accelerated cure winter formulation @ 100% solids.
1600 black epoxy urethane hybrid deck coating @ 50% elongation.

MEDIUM/HIGH BUILD EPOXY (CLEAR)
133 clear epoxy @ 100% solids.
133lv low viscosity seamless epoxy binder @ 97% solids.
134 seamless clear epoxy binder @ 100% solids.
134lv slow set seamless clear epoxy binder @ 97% solids.
135m moisture insensitive clear epoxy @ 100% solids.
135wf seamless water clear epoxy winter formulation @ 100% solids.
135lv seamless water clear epoxy binder @ 97% solids.
137m moisture insensitive clear epoxy @ 100% solids.
137mlv moisture insensitive clear epoxy @ 96.5% solids.
137mwf seamless clear epoxy winter formulation @ 100% solids.
139 flexible epoxy primer with 60% elongation @ 100% solids.
140 flexible primer with 90% elongation @ 100% solids.
GF255 crack bridging glass filled epoxy/urethane hybrid @ 20% elongation.
255 crack bridging epoxy/urethane primer @ 20% elongation.
380 quick set seamless epoxy binder @ 100% solids.
531 seamless epoxy binder @ 100% solids.
531lv seamless epoxy binder @ 96.5% solids.

EPOXY SKIDPROOFERS
016 water based colored epoxy skidproofer.
95 epoxy textured grout coat @ 100% solids.
210 industrial skidproofer in coarse or fine textures @86% solids
7175 water based epoxy textured non-slip coating @74% solids.
7250 epoxy textured non-slip colored coating @ 88@ solids.
7550 epoxy textured non-slip colored coating @98% solids.
72500 epoxy textured non-slip colored coating @100% solids.

SELF-LEVELER SELECTION
220 self-leveling epoxy @ 100% solids.

THIN BUILD EPOXY (COLORS)
143 solvent based satin finish epoxy coating @ 68% solids.
144 solvent based fast dry epoxy colored @ 65% solids.
144pm solvent based fast dry epoxy colored low odor @ 65% solids.
154 solvent based colored gloss epoxy @ 63% solids.
820 oil stop, bonds to oil contaminated concrete @ 71% solids.

THIN BUILD EPOXY (CLEAR)
145flat solvent based clear low gloss coating @ 67% solids.
154 solvent based quick dry gloss epoxy @ 63% solids.
163 solvent based clear epoxy primer/sealer/coating @ 55% solids.

THIN BUILD URETHANE COLORS
320 aliphatic polyester semi-gloss urethane @ 65% solids.
320v aliphatic polyester semi-gloss vertical urethane @ 66% solids.
321 aliphatic polyester gloss urethane @ 60% solids.
GF324 glass filled colored gloss urethane @ 68% solids.
324 aliphatic polyester gloss urethane @ 67% solids.

THIN BUILD URETHANE (CLEAR)
310 moisture cured clear urethane @ 35% solids.
310voc moisture cured clear urethane @ 62% solids.
320 aliphatic polyester semi-gloss urethane @ 65%solids.
321 aliphatic polyester gloss urethane @ 60% solids.
325 aliphatic polyester gloss urethane @ 64% solids.
357 aliphatic moisture cured clear urethane @ 40% solids.

EXPANSION JOINT FILLERS
114m-2 flexible epoxy paste @ 100% solids.
114-2 flexible epoxy joint sealant @ 100% solids.
114fs-2 flexible fast set epoxy sealant @ 100% solids.
829 epoxy urethane hybrid flexible sealant @ 100% solids.
829hv vertical epoxy urethane hybrid flexible sealant @ 100% solids.
829sf epoxy/urethane hybrid flexible joint filler -slow set.
928 chemical resistant novolac/urethane hybrid flexible joint sealant.
928hv vertical chemical resistant novolac/urethane flexible joint sealant.
931 flexible epoxy clear sealant - 23% elongation @ 100%solids.

EPOXY CRACK FILLERS
818 colored epoxy crack filler paste @ 100% solids.
819 high modulus slow set semi-clear epoxy gel.
821 low modulus semi-clear fast set epoxy gel @ 100% solids.
822 high modulus fast set semi-clear epoxy gel.
823 colored crack filler epoxy paste.

UNDERWATER EPOXY CRACK FILLERS
601 underwater crack filler epoxy paste @ 100% solids.
602 underwater pourable epoxy crack filler @ 100% solids.

NOVOLAC TOPCOAT AND INTERMEDIATE COAT (COLORED)
253 novolac epoxy coating @ 95% solids.
253sl three component novolac epoxy @ 95% solids.
GF253 acid/chemical resistant glass filled novolac epoxy @ 97% solids.
253m extreme acid/chemical resistant novolac epoxy @ 95% solids.
253v vertical acid/chemical resistant novolac seal @ 96% solids.
257 penetrating novolac epoxy primer @ 85% solids.

NOVOLAC TOPCOAT AND INTERMEDIATE COAT (CLEAR)
255 novolac/urethane hybrid crack bridging sealer.
GF255 novolac/urethane hybrid crack bridging glass filled sealer.
GF256 high build acid/chemical resistant glass filled novolac @ 98% solids.
258 clear penetrating novolac primer @ 62% solids.
256 high build novolac epoxy @ 97% solids.
453vgf glass filled vertical novolac epoxy @ 97% solids.
453vfr fiber reinforced vertical novolac epoxy @ 97% solids.

NOVOLAC MORTAR SELECTION
256m three component clear/color novolac epoxy mortar.

NOVOLAC MORTAR GROUT SELECTION
259 novolac mortar grout coat

NOVOLAC CRACK FILLER
254 novolac epoxy semi-clear crack filler.
929 novolac epoxy crack filler colored

EPOXY MORTAR REPAIR PRODUCTS
NP1 epoxy cove base formulation @ 100% solids.
105 economical epoxy mortar.
107 epoxy quick patch.
110 standard epoxy mortar with high compressive strength.
120 acid resistant epoxy mortar.
114 epoxy mortar patch kit.
114 epoxy mortar slurry.
115 epoxy mortar slurry patch kit/resurfacer.
123 food formulation epoxy mortar.
124 freezer formula epoxy mortar.
125 quick patch epoxy mortar.
126 cold weather epoxy mortar.
127 vertical epoxy mortar.
128 sub zero degree epoxy mortar.
130 tar epoxy mortar.
162 power trowel epoxy primer @ 100% solids.
381 quick set epoxy mortar patch kit/resurfacer.
600 low temperature moisture insensitive mortar @ 100% solids.
698 vertical/overhead epoxy mortar.

POWER TROWEL EPOXY MORTAR PRODUCTS
110pt standard epoxy mortar with high compressive strength.
120pt acid resistant epoxy mortar.
162 power trowel epoxy primer @ 100% solids.

EPOXY MORTAR GROUT COATS
94 epoxy clear/colored grout coat @ 100% solids.
94wf epoxy mortar grout coat.
95 epoxy clear/colored textured grout coat @ 100% solids.
95m epoxy mortar grout coat.

ANTI-STATIC PRIMERS AND SEALERS
142 black conductive epoxy primer @ 60% solids.
145cp semi-clear or black conductive epoxy primer/sealer.
163cp semi-clear conductive epoxy primer/sealer @ 66% solids.
258c black conductive novolac primer @ 64% solids.

ANTI-STATIC TOPCOATS
100hvc colored high build epoxy anti-static topcoat @ 98% solids.
200hvc colored high build epoxy topcoat @ 98% solids.
253c novolac colored anti-static topcoat @ 96% solids.
324c colored aliphatic uv stable urethane topcoat @ 70% solids.

ANTI-STATIC MORTAR PRODUCTS
110c hand trowel/power trowel epoxy mortar @ 100% solids.
120cc hand trowel/power trowel epoxy mortar @ 100% solids.
162cp power trowel primer, semi-clear.

ALL PURPOSE RESINS AND BONDING AGENTS
101gel high modulus epoxy gel @ 100% solids.
101mv medium viscosity high modulus epoxy @ 100% solids.
101lv low viscosity high modulus epoxy @ 100% solids.
102gel low modulus epoxy @ 100% solids.
102mv medium viscosity high modulus epoxy @ 100% solids.
102lv low viscosity low modulus epoxy @ 100% solids.
103mgel high modulus epoxy gel @ 100% solids.
103mv medium viscosity high modulus epoxy @ 100% solids.
103lv low viscosity high modulus epoxy @ 100% solids.
104gel low modulus epoxy gel @ 100% solids.
104mv medium viscosity low modulus epoxy @ 100% solids.
104lv low viscosity low modulus epoxy @ 100% solids.
106lv low viscosity class A bonding agent @ 100% solids.
106mv medium viscosity class A bonding agent @ 100% solids.
106hv high viscosity class A bonding agent @ 100% solids.
600l low temperature moisture insensitive epoxy @ 100% solids.
800l quickset moisture insensitive epoxy paste.
824 fast set adhesive - excellent injection port adhesive.

ROOF COATING PRODUCTS
811ls low solids acrylic roof coating.
811ms medium solids acrylic roof coating.
811hs high solids acrylic roof coating.
811fp water based acrylic -UL certified, FM certified roof coating.
812 high solids acrylic roof coating.
813 water based acrylic skylight coating - clear.
815fp water based acrylic bolt and seam caulk - UL certified.
815m flexible water based acrylic bolt and seam caulking.

VINYL ESTER PRODUCTS
4000 colored vinyl ester coating - low gloss
4010 vinyl ester mortar - available uncolored natural.

CLEANERS
915 water based terpene cleaner.
916 water based high sudsing cleaning concentrate.
917 water emulsifiable solvent based cleaner

SYSTEMS INSTALLED:

Thin Mil
100% solids epoxy polymer systems designed for tough, abrasion resistant, light reflective coating that exhibit excellent chemical resistance. 

Slurry / Broadcast 
Self-leveling and high build floors provide superior protection for moderate to heavy service conditions. These systems are available in skid-inhibiting or smooth finishes.

Mortar Systems    
Trowel applied, heavy duty resurfacing systems that are designed to withstand aggressive wear, impact and thermal shock conditions. Specific systems designed for food/beverage processing, pulp & paper and pharmaceutical industries.

Chemical Resistant  Flooring  
Coatings, linings, and mortar systems designed to resist damage from caustics, organic and inorganic acids, solvents and most other commonly used chemicals.

Decorative Flooring    
Trowel applied and broadcast colored aggregate floor systems designed for areas requiring high performance and aesthetically pleasing options.

Electrostatic Dissipating  
Specially designed to dissipate static electricity, ESD combines seamless protection with outstanding impact and abrasion resistance.

Lining Systems
Trowel applied lining systems for trenches, tanks, and secondary containment areas:  provides  seamless protection with outstanding impact, abrasion and chemical resistance.

AGV Flooring
Extra Heavy Duty topping, designed to withstand the severe abrasion in areas using automated guided vehicles.  These systems are also available in electrically conductive/dissipative versions.

Aircraft Hangar Flooring/Coatings
These systems are specially designed for hangar floors.  Properties available include high gloss and light reflective, highly durable, easy to clean, resistant to skydrol and most chemicals, and skid resistant textures available.

We have a diverse customer base. From Fortune 500 industrial companies to military/government agencies; from sole proprietorships to hi-tech start up firms.

We are proud of every project we've done because they have been done right, delivered on time and on budget!